ComfortCostGuide

Metro cost guide

Akron, Ohio: HVAC Replacement Cost Calculator

Replacing an HVAC system in Akron typically runs $3,500 to $7,000 for a gas furnace alone, $4,000 to $7,500 for central air, and $7,500 to $13,000 when you replace both at the same time. Heat pumps fall between $6,000 and $12,000 installed, while a ductless mini-split setup ranges from $3,500 to $10,000. Labor in the Akron area runs slightly above the national baseline, with local HVAC technicians earning about $31.73 per hour.

Worked example

Take a 1,700-square-foot two-story home in West Akron with a 22-year-old gas furnace and a matching outdoor AC unit that has started leaking refrigerant. Because both pieces are at end of life and the ductwork is already in place, the homeowner replaces them together as a matched system. A mid-efficiency furnace paired with a standard-efficiency air conditioner would land near the middle of the $7,500 to $13,000 combined range, closer to the top end if the contractor also has to replace the line set, add a new thermostat, or bring the flue and electrical connections up to current code.

Frequently asked questions

How much does it cost to replace a furnace in Akron?

A gas furnace replacement in Akron generally costs $3,500 to $7,000 installed, including equipment and labor. Basic single-stage units in an easy-access basement sit at the low end, while high-efficiency modulating furnaces, tight crawlspace installs, or venting changes push toward $7,000.

Is a heat pump a good choice for Akron's winters?

Akron sits in climate zone 5, so winters are cold enough that heat pump sizing and backup heat matter. Installed costs run $6,000 to $12,000, and many Akron homeowners pair a heat pump with their existing gas furnace as a dual-fuel system so the furnace takes over on the coldest nights.

Why does replacing the AC and furnace together cost less than doing them separately?

A combined AC and furnace replacement in Akron runs $7,500 to $13,000, which is less than the $4,000 to $7,500 for AC plus $3,500 to $7,000 for a furnace done as two separate jobs. You pay one trip charge, one round of labor, and avoid mismatched equipment that can drag down efficiency.

What drives labor costs on an Akron HVAC install?

Akron labor runs about 2 percent above the national baseline, with technicians earning roughly $31.73 per hour. A straightforward swap in an accessible basement takes a crew most of a day, while jobs involving new ductwork, electrical upgrades, or attic and crawlspace access add hours and push you toward the upper end of each range.

Can a ductless mini-split work in an older Akron home?

Yes, and it is a common fix for Akron's older housing stock that never had ductwork or has additions the main system cannot reach. Mini-split costs range from $3,500 for a single-zone unit to $10,000 for a multi-zone system covering several rooms.

Related cost guides